1992 Rover 216

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer sill area (6.1.1 (c) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer sill area (6.1.1 (c) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak ()

slight leakage of grease from nearside inner and outer constant velocity joint gaiters

Oil leak ()

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

both rear tyres perished

slight blow from exhaust system front box

unable to see condition of front brake pads

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

underside of vehicle body and components showing signs of corrosion

Brakes imbalanced across an axle (3.7.B.5b)

Nearside front brake binding (3.7.B.1)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

underside of vehicle body and components showing signs of corrosion

Front registration plate insecure (6.3.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Mechanical brake component has restricted free movement (3.5.1k)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Tie bar/rod worn but not seriously weakened (2.4.G.1)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tie bar/rod worn but not seriously weakened (2.4.G.1)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)