1992 Saab 900

Vehicle structure is corroded but structural rigidity is not significantly reduced both sills and x 4 jack points (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced both sills and x 4 jack points (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced both sills and all jacking points (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced both sills and all jacking points (6.1.1 (c) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Seat belt buckle slightly damaged (7.1.2 (d))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Exhaust system insecure (6.1.2 (a))

Offside Front Seat belt buckle slightly damaged (7.1.2 (d))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Front Direction indicator incorrect colour both (4.4.3 (a))

Front Side repeater not working both (4.4.1 (a) (ii))

Offside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Seat belt anchorage prescribed area strength or continuity significantly reduced both sides inner sills/floors and offside inner rear arch (7.1.1 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive arch (7.1.1 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

rear underside body has corrosion both sides

Battery insecure (1.9.1)

Central Exhaust system not adequately supported (7.1.1)

Hazard warning switch faulty (1.4.B.1d)

Headlamp switch faulty cannot check all light (1.7.1)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Seat belt anchorage prescribed area is excessively corroded hole in floor pan as marked (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill as marked (5.2.6)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Front Steering rack gaiter split (2.2.D.2d)

Rear Exhaust system not adequately supported (7.1.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front Steering rack gaiter deteriorated (2.2.D.2d)

Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Body has slight corrosion (6.1.B.2)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside front coil spring lower mounting plate corroded

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside front coil spring lower mounting plate corroded

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Rear Exhaust system not adequately supported (7.1.1)

Centre Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Outer Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Brake pad(s) wearing thin (3.5.1g)