1991 Mercedes-benz 310

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Hydraulic leak, but not excessive Clutch slave cylinder (8.4.1 (a) (i))

Nearside Rear Upper Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Fuel cap/sealing device ineffective TEMP CAP FITTED (6.1.3 (b) (i))

Offside Rear Direction indicator not working UPPER / LOWER (4.4.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded by servo mounting (1.1.21 (e) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive front spring hanger (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Offside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake load sensing valve linkage defective and function impaired linkage is ceased (1.1.17 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre has ply or cords exposed excessively cracked (5.2.3 (d) (ii)) DANGEROUS

Offside Brake master cylinder/servo mounting prescribed area is excessively corroded and functionality of the braking system is affected (1.1.21 (e) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed excessively cracked (5.2.3 (d) (ii)) DANGEROUS

Rear Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule front and rear (1.1.12 (f) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive front spring hanger (5.3.6 (a) (i))

Nearside Front sidelight is dim

Offside Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

general corrorsion is taking effect on the underside of the vehicle

power steering pipes are starting to corroded

rear exhaust rubber is in poor condition and has temp repair

slight play in both front kingpins

underside showing some signs of corrosion

Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Position lamp not working all (4.2.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

underside showing some signs of corrosion

both rear metal brake pipes forming rust

o/s rear tyre geting low

slight play in steering

both front brake pipes forming rust

o/s rear tyre geting low

slight play in both inner rack joints

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

OFFSIDE REAR UPPER MARKER SIDE/STOP LAMP NOT WORKING