1992 BMW 316

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Inner Front Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)

Offside Rear Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Rear Exhaust system not adequately supported (7.1.1)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake disc slightly pitted (3.5.1h)

front no plate poor condition

off side rear shock absorber top mount worn

rear axle brake pipes corroded

slight leak from centre exhaust clamp

Brake pipe excessively corroded (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear registration plate deteriorated (6.3.1d)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.C4)

Nearside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.C4)

Steering column flexible coupling cracked and unserviceable (2.2.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front brake disc slightly scored (3.5.1h)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

fuel pipes corroded