MOT Status
ExpiredMileage
68,071 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Side repeater missing (1.4.A.2b)
Nearside Stop lamp not working (1.2.1b)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.8)
Offside Inner Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Rear fog lamp not working (1.3.2b)
front brake application uneven (3.7.B.2)
Offside Steering rack gaiter split (2.2.D.2d)
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front Brake pipe inadequately supported (3.6.B.1)
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Inner Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp not working on main beam (1.7.5a)
Offside Inner Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Nearside Front Direction indicators incorrect colour (1.4.A.2f)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Direction indicators incorrect colour (1.4.A.2f)
Offside Rear position lamp(s) not working (1.1.A.3b)
heavy surface corrosion outer sills
welding repairs carried out inside of vehicle
Nearside Headlamp aim too high (1.8)
Nearside Steering rack gaiter split (2.2.D.2d)
heavy surface corrosion outer sills
welding repairs carried out inside of vehicle
Centre Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Headlamp aim too low (1.8)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Rear fog lamp not working (1.3.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Spare tyre defective
Underbody has heavy surface corrosion
nearside and offside front floor pans have heavy surface corrosion
under body corroding
Front Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)
Front registration plate obscured (6.3.1d)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Advise corrosion on nearside front and offside front floors.
Nearside Front Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Direction indicator slightly discoloured (1.4.A.2f)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Rover Mini?
Based on 519,169 MOT tests across 45,631 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J625 BAK is a 1992 Rover Mini in Yellow with a 998cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 46.7%.
Across all 1992 Rover Mini models, the average MOT pass rate is 63.9% with a typical mileage of 55,446 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover Mini fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 32,036 recorded failures. If you're considering buying J625 BAK, it's worth having these areas checked by a mechanic before committing.
The Rover Mini typically stays on UK roads for around 47 years. At 34 years old, this Rover Mini is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of J625 BAK?
You can check the full history of J625 BAK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J625 BAK registered?
J625 BAK is a 1992 Rover Mini, first registered on 19 May 1992.
Is J625 BAK safe to buy?
The MOT history for J625 BAK shows 15 tests with a 46.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J625 BAK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J625 BAK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.