MOT Status
ExpiredMileage
157,329 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
all brake pipes covered in underseal
underbody rusty and weak
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
all brake pipes covered in underseal
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Rear Braking system leaking (3.6.A.1)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar linkage insecure (2.4.G.1)
Offside Front Anti-roll bar linkage insecure (2.4.G.1)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Floor to sill corroded both side's and rear inner sill's corroded
Front Brake pad(s) wearing thin (3.5.1g)
Offside front tyre worn on inner edge
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J689 UNH is a 1991 Mazda 323 in White with a 1,598cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 54.5%.
Across all 1991 Mazda 323 models, the average MOT pass rate is 61.7% with a typical mileage of 96,966 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying J689 UNH, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 35 years old, this Mazda 323 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J689 UNH?
You can check the full history of J689 UNH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J689 UNH registered?
J689 UNH is a 1991 Mazda 323, first registered on 28 November 1991.
Is J689 UNH safe to buy?
The MOT history for J689 UNH shows 11 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J689 UNH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J689 UNH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.