1992 Rover Mini

Offside Front Body has slight corrosion (6.1.B.2)

Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Steering column top bearing slightly worn (2.1.2c)

Horn not working (1.6.2a)

Nearside Front Direction indicators not working (1.4.A.2c)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Offside Front Body has slight corrosion (6.1.B.2)

Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

o/s/front floor area corroded, a plate welded on in side, unable to see weld

Steering pivot point has slight play (2.2.B.1g)

Offside Front Lower Steering pivot point has excessive play (2.2.B.1g)

Suspension component mounting prescribed area is fractured (2.4.A.3)

Steering pivot point has slight play (2.2.B.1g)

offside inner cv gaiter insecure.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

offside inner drive shaft gaiter insecure. corrosion to nearside floor, offside front floor and nearside rear inner arch,

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside inner c.v boot insecure

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front registration plate missing (6.3.1a)

Nearside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Side repeater insecure (1.4.A.2b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Rear fog lamp missing (1.3.2a)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside Side repeater insecure (1.4.A.2b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside inner c.v boot insecure

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear fog lamp missing (1.3.2a)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Rear Brake cable locking device missing (3.5.1l) DANGEROUS

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Steering column movement between the shaft and steering wheel (2.1.2b)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

h/brake cable slightly rusted