1992 Yamaha Fj

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement linkages (5.3.4 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Clutch lever bent (6.2.7 (b))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Nail in tyre ()

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bearing has slight free play swinging arm (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bearing has slight free play swinging arm (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Clutch lever bent (6.2.1g)

Rear Brake disc(s) has slight run out (3.2.A1m)

Headlamp aim too high (1.6)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Footrest insecure (6.2.1a) DANGEROUS

Rear suspension component cracked (2.4.A.1a) DANGEROUS

Rear suspension component excessively corroded. (2.4.A.1a) DANGEROUS

Clutch lever bent (6.2.1g)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) has slight run out (3.2.A1m)

Nail in rear tyre

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nail in rear tyre

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering headbearing has slight free play (2.2.2)

Offside Front shock absorber has light misting of stanchion (2.3.3)

only one bulb working at rear light

Rear Brake disc(s) excessively worn (3.2.A1l) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Nearside Rear position lamp damaged but function not impaired (1.1.1b)

Offside Stop lamp damaged but function not impaired (1.3.3a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp remains on when the brake is released (1.3.1e)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Brake lever cannot be applied smoothly (3.1.3d)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))