1992 Fiat Ducato

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust noisy (8.1.1 (a))

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced both wheel arch (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner and outer sills (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Play in steering rack inner joint(s)

Rear Leaf spring modified but not seriously weakened both (5.3.1 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

under body covered with under-seal

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust noisy (8.1.1 (a))

Exhaust system insecure (6.1.2 (a))

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced both wheel arch (6.1.1 (c) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both inner and outer sills (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Play in steering rack inner joint(s)

Rear Leaf spring modified but not seriously weakened both (5.3.1 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

under body covered with under-seal

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake pipe corroded, covered in grease or other material nearside front and nearside rear (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Front Headlamp lens slightly defective Both (4.1.1 (b) (i))

Hazard warning switch faulty (4.4.2 (a) (i))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis outrigger (5.3.6 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis outrigger (5.3.6 (a) (i))

corrosion underbody in and out of prescribed areas

front lower outer sills rusted through, not in prescribed area

nearside front bumper support corroded and weak

nearside rear park brake slightly low reading, requires repair or adjustment

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Wheel bearing has slight play both (5.1.3 (a) (i))

Battery insecure but not likely to fall from carrier in cab (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases 1st silencer (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material through cab bulkhead (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity lens damaged (4.2.3 (b) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear of rear spring bracket area (5.3.6 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Battery insecure but not likely to fall from carrier in cab (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases 1st silencer (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material through cab bulkhead (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity lens damaged (4.2.3 (b) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear of rear spring bracket area (5.3.6 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))

Nearside Rear Brake pipe excessively corroded front to compensator steel (1.1.11 (c))

Offside Rear Brake pipe excessively corroded joiner to wheel cylinder steel (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Body has slight corrosion body has been plated (6.1.B.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside rear brake binding

Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp affected by indicator (1.1.A.3f)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Registration plate lamp not working (1.1.C.1d)

Body has slight corrosion body has been plated (6.1.B.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside rear brake binding

Brake pipe slightly corroded all (3.6.B.2c)

Offside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust system not adequately supported (7.1.1)

Front Body has a sharp edge caused by damage (6.1.C.1)

Fuel system component leaking (7.2.3)

Horn not working (1.6.2a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Headlamp damaged but light output not reduced (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp damaged but light output not reduced (1.7.5a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Suspension joint offside lower dust cover split/missing

battery insecure

off side front bumper cap missing

damage to off side front sill which has started to corrode ,,but not effecting load bearing aerea steering /brakes

front bumper corner section missing

Horn not working (1.6.2a)

Nearside Front Headlamp flickers when tapped lightly by hand (1.2.4c)

Nearside Stop lamp not working (1.2.1b)

Offside Front Headlamp flickers when tapped lightly by hand (1.2.4c)

Offside Front Side repeater not working (1.4.A.2c)

damage to off side front sill which has started to corrode ,,but not effecting load bearing aerea steering /brakes

front bumper corner section missing

Brake load sensing valve linkage seized (3.6.E.3)

Front Exhaust system not adequately supported (7.1.1)

Headlamp aim not tested (1.8.A.1c)

Horn not working (1.6.2a)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Rear Direction indicator incomplete (1.5.A1b)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Side repeater not working (1.4.A.2c)

off side front bumper end cap missing

off side rear tyre wall perished

Horn not working (1.6.2a)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Horn not working (1.6.2a)

Nearside Front Headlamp aim too low (1.8)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Rear Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.5c)