1992 Rover Mini

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust mounting defective rear box hanger bolts loose. (6.1.2 (a))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Sub-frame pin or bush excessively worn all front bushes worn. (5.3.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust mounting defective rear box hanger bolts loose. (6.1.2 (a))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Direction indicators not working (1.4.A.2c)

Rear fog lamp not working (1.3.2b)

Stop lamp not working (1.2.1b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Shock absorber has a slightly worn bush Both rear (2.7.4)

Sub-frame rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

registration plate deteriorated but not likely to be misread Both front and rear (6.3.1d)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Shock absorber has a slightly worn bush Both rear (2.7.4)

Sub-frame rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

Tyre worn close to the legal limit Both front (4.1.E.1)

registration plate deteriorated but not likely to be misread Both front and rear (6.3.1d)

Both rear tyres worn bald on edges

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Oil Leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Shock absorber has a slightly worn bush Both rear (2.7.4)

Sub-frame rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Both rear tyres worn bald on edges

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Oil Leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Shock absorber has a slightly worn bush Both rear (2.7.4)

Sub-frame rubber bush deteriorated but not resulting in excessive movement Both front (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside rear tyre cracking and wearing inner edge

Offside rear tyre starting to wear outer edge

Oil leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside rear tyre cracking and wearing inner edge

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside rear tyre starting to wear outer edge

Oil leak

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Steering rack gaiter split (2.2.D.2d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)