1993 Honda Transalp

Brake disc(s) slightly worn (3.2.A1l)

Rear nail rear tyre

Tyre worn close to the legal limit (4.1.3(ii))

Wheel corroded but not significantly reducing the original strength (4.2.1a)

gearchage loose

Brake disc(s) slightly worn (3.2.A1l)

Rear nail rear tyre

Rear shock absorber has inadequate damping effect. adjusted (2.4.A.3b)

Tyre worn close to the legal limit (4.1.3(ii))

Wheel corroded but not significantly reducing the original strength (4.2.1a)

gearchage loose

Front Brake lever is damaged and the brake cannot be readily applied (3.1.3c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Front Direction indicators affected by the operation of another lamp (1.5.1c)

Offside Rear Direction indicators affected by the operation of another lamp (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp remains on when the brake is released (1.3.1e)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Handlebar mounting slightly deteriorated (2.1.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

chain is dry

throttle sticky

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Headlamp aim too low (1.6)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear suspension has a fracture of a load bearing member or its supporting structure. (2.4.A.2d) DANGEROUS

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Direction indicators not working (1.5.1c)

Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Brake disc(s) slightly worn (3.2.A1l)