MOT Status
ValidMileage
209,999 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
underside heavily undersealed
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor pan area (6.1.1 (c) (i))
Nearside Front Play in steering rack inner joint(s)
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced step area (6.1.1 (c) (i))
Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
emissions very near max limits
mileage reading not working
Brake performance unable to be tested fluid leak (1.2.1 (g))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Front Windscreen washer not working (3.5 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Brake valve leaking bias valve (1.1.7 (d) (i))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor pan area [holed] (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Play in steering rack inner joint(s)
Nearside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced step area (6.1.1 (c) (i))
Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Suspension component pin or bush slightly worn (5.3.4 (a) (i))
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Front Registration plate inscription illegible (0.1 (b))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer not working (3.5 (a))
Nearside Play in steering rack inner joint(s)
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Obligatory mirror slightly damaged (3.3 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
all steering bushes in poor condition
all suspension bushes in poor condition
exhaust wearing through gear box
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Service brake lagging in operation (1.2.1 (d))
Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Axle insecure (5.1.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Axle insecure (5.1.1 (b) (i))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Shock absorbers likely to become detached (5.3.2 (a) (ii)) DANGEROUS
Offside Rear Shock absorbers likely to become detached (5.3.2 (a) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm 235 70 15 h (5.2.3 (e)) DANGEROUS
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
all steering and suspension bushes in very poor condition just meet min requirements
exhaust wearing through gearbox
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
front rear seats facing rear at time of test
nsf and osf inner arch area corroded
nsr inner sill area corrded
osr inner area corroded
osr inner sill area corroded
rear seat made up as bed
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Rear Registration plate does not conform to the specified requirements (0.1 (d))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
front rear seats facing rear at time of test
nsf and osf inner arch area corroded
nsr inner sill area corrded
osr inner area corroded
osr inner sill area corroded
rear seat made up as bed
Brake fluid warning lamp illuminated (1.1.10 (f))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
both rear inner sill corroded
front suspension close to bump stops
no seats fitted in rear at time of test
osf wheel arch area corroded close to floor
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced front wing area (7.1.1 (a) (i))
Brake fluid warning lamp illuminated (1.1.10 (f))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
both rear inner sill corroded
front suspension close to bump stops
no seats fitted in rear at time of test
osf wheel arch area corroded close to floor
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Inner Suspension spring mounting prescribed area repaired, but not inappropriately sill area outside prescribed area (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch area (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill area (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch area (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill area (2.4.A.3)
Rear Suspension spring mounting prescribed area is inadequately repaired at 'U' bolts area (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Inner Suspension spring mounting prescribed area repaired, but not inappropriately sill area outside prescribed area (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch area (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch area (2.4.A.3)
Rear Suspension spring mounting prescribed area is excessively corroded at 'u' bolts area (2.4.A.3)
Front wheel bearing has slight play both sides (2.5.A.3c)
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (outside of prescribed area) (2.4.A.3)
Front Fuel system component leaking engine area (7.2.3)
Fuel system component leaking (7.2.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Coolant leak
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Under-trays fitted obscuring some underside components
suspect light switch faulty??
Fuel system component leaking (7.2.3)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Under-trays fitted obscuring some underside components
suspect light switch faulty??
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Front front brake juddering severely (3.7.A.2b)
Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Offside Front front brake juddering severely (3.7.A.2b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake hose leaking (3.6.A.1)
Offside Front Brake hose bulging under pressure (3.6.B.3)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
front suspension touching bump stops
Nearside Steering rack gaiter split (2.2.D.2d)
front suspension touching bump stops
How Reliable is the Mitsubishi Delicia?
Based on 4,871 MOT tests across 347 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J879 KHY is a 1992 Mitsubishi Delicia in White with a 2,500cc diesel engine. This vehicle has been through 31 MOT tests with a personal pass rate of 54.8%.
Across all 1992 Mitsubishi Delicia models, the average MOT pass rate is 61.8% with a typical mileage of 140,226 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Delicia fails its MOT is brake pipe excessively corroded, accounting for 265 recorded failures. If you're considering buying J879 KHY, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Delicia typically stays on UK roads for around 36 years. At 34 years old, this Mitsubishi Delicia is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J879 KHY?
You can check the full history of J879 KHY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J879 KHY registered?
J879 KHY is a 1992 Mitsubishi Delicia, first registered on 31 December 1992.
Is J879 KHY safe to buy?
The MOT history for J879 KHY shows 31 tests with a 54.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J879 KHY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J879 KHY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.