1996 Mazda Bongo

Brake disc worn, pitted or scored, but not seriously weakened x4 (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Outer Anti-roll bar ball joint has slight play x2 (5.3.4 (a) (i))

all underside undersealed

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Brake disc worn, pitted or scored, but not seriously weakened x4 (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Outer Anti-roll bar ball joint has slight play x2 (5.3.4 (a) (i))

all underside undersealed

both rear lower quarter pockets corroded, not within 30cm of any structural mounting

front tyres cracking/worn on edges

headlight lenses deteriorated

rear exhaust mount deteriorated

underbody corroded

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

both rear lower quarter pockets corroded, not within 30cm of any structural mounting

front tyres cracking/worn on edges

headlight lenses slightly deteriorated

underbody corroded

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

coolant leak

ns sill holed non structural

rear inner arch holed non structural

various welding repairs before

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at shocker on chassis leg (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

coolant leak

ns sill holed non structural

rear inner arch holed non structural

various welding repairs before

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

osr at bumper holed (non structural)

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

osr at bumper holed (non structural)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis at upper shock absorber mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg shock absorber mount (5.3.6 (a) (i))

Nearside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corner behind bumper (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Nearside Rear Inner arch full of expanding foam

outer sills corroded

suspension components corroded

brake pipe across rear axle corroded in places

corrosion nearside and offside rear outer sills and wheel arches

corrosion under body and various suspension componants

Exhaust has a major leak of exhaust gases Rear flexible system (7.1.2)

Nearside Suspension component mounting prescribed area is excessively corroded Innersill (2.4.A.3)

Nearside front brake binding (3.7.B.1)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Suspension component mounting prescribed area is excessively corroded Innersill x3 holes (2.4.A.3)

Offside front brake binding (3.7.B.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

all tyres valves perished

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear fog lamp not working (1.3.2b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

all tyres valves perished

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

exhaust rear box heat shield inscure

offside front brake discs corroded on inner face

vehicle underbody corroded

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Valve stem slightly damaged (4.1.D.1e)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Valve stem slightly damaged (4.1.D.1e)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Valve stem slightly damaged (4.1.D.1e)

Nearside Front Steering rack gaiter insecure (2.2.D.2d)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Steering rack gaiter insecure (2.2.D.2d)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Valve stem slightly damaged (4.1.D.1e)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Valve stem slightly damaged (4.1.D.1e)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Valve stem slightly damaged (4.1.D.1e)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front tyres wearing uneven, tracking needs checking