1992 Renault Trafic

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre outrigger (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Central Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front trackrod end slight play

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Direction indicator missing (4.4.1 (a) (ii))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer not working (3.5 (a))

Rear Spare wheel likely to become detached (6.1.5 (b) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jack point (6.1.1 (c) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jack point (6.1.1 (c) (i))

Offside Inner Vehicle structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Both headlamps are for LHD market and have tape or beam converters fitted on glass

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp reflector seriously defective (4.1.1 (b) (ii))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive front (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Coolant overheated during test

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Coolant overheated during test

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Minor damage to windscreen

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Minor damage to windscreen

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

VEHICLE OVERHEATED DURING TEST

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

VEHICLE OVERHEATED DURING TEST

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

vehicle overheated during emissions test

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Hazard warning lamps inoperative (1.4.B.1b)

Hazard warning switch faulty (1.4.B.1d)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

vehicle overheated during emissions test

Offside Front Steering rack gaiter split (2.2.D.2d)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Hazard warning switch faulty (1.4.B.1d)

Offside Steering rack gaiter split (2.2.D.2d)

nearside rear bumper corner missing

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Steering system has slight free play detected at steering wheel (2.2.A.1b)

Offside Steering system has slight free play detected at steering wheel (2.2.A.1b)

Rear Stop lamp not working (1.2.1b)