MOT Status
ValidMileage
90,941 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust flexi deteriorated
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component pin or bush slightly worn nearside and offside axle bushes (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Exhaust mounting defective front flexi deteriorated and allowing excessive movement. (6.1.2 (a))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component pin or bush slightly worn nearside and offside axle bushes (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Rear mounting (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Offside and Nearside (5.1.2 (b) (i))
Rear Tyre worn close to legal limit/worn on edge Offside and Nearside worn on inner edge (5.2.3 (e))
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Floor pan area (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor pan area (5.3.6 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i))
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under wheel arch near shock absorber (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under wheel arch near shock absorber (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor pan area (5.3.6 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
body corroded
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
body corroded
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer floor pan (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer floor pan (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge slightly worn (5.2.3 (e))
Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
front offside floor pan area corroded
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill / lower wheel arch area holed (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded outer sill /lower wheel arch area holed (2.4.A.3)
Offside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
front offside floor pan area holed
front offside floor pan corroded
front nearside tyre outer edge worn
rear tyres walls perished/ small splits
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J8 KBV is a 2006 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 78.3%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying J8 KBV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of J8 KBV?
You can check the full history of J8 KBV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J8 KBV registered?
J8 KBV is a 2006 Ford Ka, first registered on 31 July 2006.
Is J8 KBV safe to buy?
The MOT history for J8 KBV shows 23 tests with a 78.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J8 KBV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J8 KBV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.