1999 Mazda MX-5

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Integral body structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect too high and distorted image (4.1.2 (c))

Rear Position lamp adversely affected by the operation of another lamp both rear position lamps show interference by indicators (4.2.3 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill corroded (6.1.1 (c) (i))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp lens slightly defective lens cracked (4.1.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Horn not working (7.7 (a) (ii))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Rear Tyre perishing

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Horn not working (7.7 (a) (ii))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear subframe corroded

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Position lamp not working (4.2.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive SILL (2.4.A.3)

Nearside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Side repeater not working (1.4.A.2c)

Nearside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

nearside rear outer sill has an area filled with a thick undersill type goo. I have been unable to access whether there is excessive corrosion hidden within in this area.

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Rear fog lamp insecure (1.3.2a)

Rear Rear fog lamp not working (1.3.2b)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)