MOT Status
ValidMileage
109,340 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill and step (6.1.1 (c) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill and step (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill and step (6.1.1 (c) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill and step (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material Front to rear (all) coated in sealant (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Leaf spring has slight wear in an anchor pin and/or bush Both sides (5.3.4 (a) (i))
Under body and components coated in sealant
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
All position lamps slightly affected by the operation of another lamp (4.2.3 (c))
Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush front and rear bush (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill and jacking point outrigger (outrigger has small corrosion hole but not within prescribed area (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing rear of bumper (6.1.1 (c) (i))
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush front and rear bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded coils corroded (5.3.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive all rear spring hangers (5.3.6 (a) (i))
underside waxoiled
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Exhaust system insecure loose on clamp (6.1.2 (a))
Front Exhaust has a major leak of exhaust gases exhaust broken on repair tape (6.1.2 (a))
Front Fuel system component leaking injector (6.1.3 (b) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Rear Position lamp has a product on the lens or light source which shows white light to the rear lights on bumpers (4.2.3 (b) (ii))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
All position lamps slightly affected by the operation of another lamp (4.2.3 (c))
Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush front and rear bush (5.3.4 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill and jacking point outrigger (outrigger has small corrosion hole but not within prescribed area (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing rear of bumper (6.1.1 (c) (i))
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush front and rear bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded coils corroded (5.3.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive all rear spring hangers (5.3.6 (a) (i))
underside waxoiled
Electrical wiring insecure and connectors likely to become disconnected positive battery terminal (4.11 (a) (ii))
Emissions not tested exhaust has major leak split front pipe (8.2.2.2 (e))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust system insecure (6.1.2 (a))
Fuel system component leaking on injector (6.1.3 (b) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Position lamp showing white light to the rear on rear bumper (4.2.3 (a) (ii))
Rear fog lamp switch inoperative (4.5.3 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush front and rear (5.3.4 (a) (i))
Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill to near jacking point outrigger (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing rear of bumper (6.1.1 (c) (i))
Offside Rear Leaf spring has slight wear in an anchor pin and/or bush front and rear (5.3.4 (a) (i))
Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
underside of vehicle wax oiled
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Nearside Rear Inner Leaf spring has slight wear in an anchor pin and/or bush & outer (5.3.4 (a) (i))
Offside Rear Inner Leaf spring has slight wear in an anchor pin and/or bush & outer (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Brake hose slightly deteriorated all (1.1.12 (b) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake hose slightly deteriorated all (1.1.12 (b) (ii))
Front Brake pipe corroded, covered in grease or other material to rear at front (1.1.11 (c))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
surface corrosion chassis
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i))
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer near bumper mount (5.3.6 (a) (i))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i))
Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i))
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer near bumper mount (5.3.6 (a) (i))
Offside Front Upper Brake hose excessively deteriorated (1.1.12 (b) (ii))
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Brake hose has slight corrosion to ferrule all other (1.1.12 (f) (i))
Brake hose slightly deteriorated all (1.1.12 (b) (ii))
Front Brake pipe corroded, covered in grease or other material to rear at front (1.1.11 (c))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Spare tyre defective ()
surface corrosion chassis
Front Brake pipe corroded, covered in grease or other material to rear at front (1.1.11 (c))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive step (5.3.6 (a) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front inner wheel arches (5.3.6 (a) (i))
all brake hoses perished
Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
corrosion to underside
both front wheel bearings slightly noisy
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
both front wheel bearings slightly noisy
Nearside Front wheel bearing has slight play (2.5.A.3c)
O/s/f wheel bearing noisy.
Brake pipe excessively corroded (3.6.B.2c)
Emissions not tested (7.4.B.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Faint beam pattern O/s headlamp.
Nearside Front wheel bearing has slight play (2.5.A.3c)
O/s/f wheel bearing noisy.
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Rear wheel bearing has slight play (2.6.2)
o/s/f outrigger under the driver door slightly corroded
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)
Brake pedal has insufficient reserve movement (3.3.A.5)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside rear brake recording little or no effort (3.7.B.5a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Rear wheel bearing has slight play (2.6.2)
o/s/f outrigger under the driver door slightly corroded
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Fuel system component leaking (7.2.3)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
How Reliable is the Fiat Ducato?
Based on 1,962,737 MOT tests across 142,446 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J968 VVN is a 1992 Fiat Ducato in White with a 1,929cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 70.8%.
Across all 1992 Fiat Ducato models, the average MOT pass rate is 66.0% with a typical mileage of 86,936 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Fiat Ducato fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 34,174 recorded failures. If you're considering buying J968 VVN, it's worth having these areas checked by a mechanic before committing.
The Fiat Ducato typically stays on UK roads for around 38 years. At 34 years old, this Fiat Ducato is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J968 VVN?
You can check the full history of J968 VVN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J968 VVN registered?
J968 VVN is a 1992 Fiat Ducato, first registered on 1 May 1992.
Is J968 VVN safe to buy?
The MOT history for J968 VVN shows 24 tests with a 70.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J968 VVN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J968 VVN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.