1992 Fiat Ducato

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Wheel bearing has slight play both front (5.1.3 (a) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Headlamp light source and lamp not compatible (4.1.4 (c))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Service brake excessively binding all 4 wheel (1.2.1 (f))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Wheel bearing has slight play both front (5.1.3 (a) (i))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Horn not working (7.7 (a))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal suspension mounting (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pipes have a protective coating I.e grease/underseal, restricting inspection of brake pipes.

Central Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Underside of vehicle covered in wax oil restricting full inspection

manufactures sill and body covers fitted restricting inspection

Brake pipes have a protective coating I.e grease/underseal, restricting inspection of brake pipes.

Underside of vehicle covered in protective coating I.e underseal, restricting inspection

manufactures sill and body covers fitted restricting inspection

Brake pipes have a protective coating I.e grease/underseal, restricting inspection of brake pipes.

Underside of vehicle covered in protective coating I.e underseal, restricting inspection.

brake pipes and underside of vehicle is covered in protective coating unable to check corrosion

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Vehicle structure has slight damage (6.1.A.1)

Oil leak

Rear Leaf spring splayed and lightly rubbing (2.4.B.1c)

Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Upper Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Vehicle structure has slight damage (6.1.A.1)

Offside Upper Front position lamp(s) not working (1.1.A.3b)

Oil leak

Rear Leaf spring splayed and lightly rubbing (2.4.B.1c)

Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Upper Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Exhaust mounting missing (7.1.1b)

Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension component mounting prescribed area is fractured (2.4.A.3)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe fouled by moving parts (3.6.B.2a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Suspension component mounting prescribed area is fractured (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

exhaust rear mountings getting perished

light switch slightly loose in operation

rear fog lamp body cracked

fuel pipes on pump perished

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Headlamp aim too low and too far to the right. (1.8)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Steering rack insecure (2.2.B.1a)

fuel pipes on pump perished

n/s/f driveshaft oil seal leaking