1992 Honda Prelude

All suspension components corroded

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Upper Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pipe corroded, covered in grease or other material n/s/r and o/s/r (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension arm corroded but not seriously weakened inner sill (5.3.3 (b) (i))

both front anti roll bar bushes perished

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

front anti roll bar bushes perished

Service brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear brake discs poor condition

o/s/r brake back plate corroded away

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear brake discs poor condition

o/s/r brake back plate corroded away

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear brake binding (3.7.B.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

evedenc of corrosion both sill,plastic sill covers fitted

hand brake cable to caliper quodrant sezed

o/s/f door handel stiff to open from inside

All front suspension bushes deteriorated but no excessive movement

All rear suspension bushes deteriorated but no excessive movement

Exhaust corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Rear brake disc back plates/covers very corroded (not yet insecure)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b) DANGEROUS

All front suspension bushes deteriorated but no excessive movement

All rear suspension bushes deteriorated but no excessive movement

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

Rear brake disc back plates/covers very corroded (not yet insecure)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Hand brake high travel

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Power steering pipes corroded

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear brake discs corroded scored and worn

Rear number plate starting to delaminate

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Underbody showing widespead surface corrosion

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

High travel handbrake lever

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly pitted (3.5.1h)

Rear brake disc slightly scored (3.5.1h)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Suspension joint offside lower dust cover split/missing

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Hand brake travel high(limited reserve travel)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly pitted (3.5.1h)

Rear brake disc slightly scored (3.5.1h)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Suspension joint offside lower dust cover split/missing

Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

light scratching of windscreen

Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

light scratching of windscreen

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

slight scratches on windscreen caused by defective wiperblade new smaller blade has been fitted

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

slight scratches on windscreen caused by defective wiperblade new smaller blade has been fitted

surface corrosion on fuel pipes

front No plate cracked

front tyres worn on inside edge

slight screen scratch

surface corrosion on brake pipes