2012 Mazda 3

Offside Front Outer Tyre worn close to legal limit/worn on edge edges worn (5.2.3 (e))

Rear Suspension component covered in underseal no significant corrosion

Underbody undersealed no significant corrosion

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside Front Outer Tyre worn close to legal limit/worn on edge edges worn (5.2.3 (e))

Rear Suspension component covered in underseal no significant corrosion

Underbody undersealed no significant corrosion

Front registration plate damage/crack

Nearside Front fog lamp not working

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre ()

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

various point of surface corrosion underneath the vehicle

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front fog lamp not working

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre ()

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

various point of surface corrosion underneath the vehicle

Nearside Front Foglamp not working.

Nearside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Outer Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension arm corroded but not seriously weakened Nearside & Offside. (5.3.3 (b) (i))

Various point of surface corrosion underneath the vehicle.

Integral body structure is corroded but structural rigidity is not significantly reduced floorpan/sill areas (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear corrosion to running gear

Front both tyres worn inner edges

Integral body structure is corroded but structural rigidity is not significantly reduced floorpan/sill areas (6.1.1 (c) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear corrosion to running gear

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Both rear tyres are badly worn on inner edge

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most arm (5.3.4 (a) (i))

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear both rear tyres scrubbing on inside edge

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear both rear tyres scrubbing on inside edge