2011 Audi A4

Headlamp cleaning device inoperative both (4.1.6 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play front (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))

Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i))

Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Service brake excessively fluctuating both (1.2.1 (e))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Headlamp cleaning device inoperative both (4.1.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Tyre worn close to legal limit/worn on edge BOTH rear (5.2.3 (e))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Tyre worn close to legal limit/worn on edge BOTH rear (5.2.3 (e))

Direction indicator slightly discoloured BOTH rear (4.4.3 (a))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Tyre worn close to legal limit/worn on edge BOTH front (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre worn close to legal limit/worn on edge BOTH rear (5.2.3 (e))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge very low (5.2.3 (e))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge very low (5.2.3 (e))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Front tyre low on inner edge

Nearside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 245/40/18 (5.2.3 (d) (i))

Offside Front tyre low on inner edge

Central Front brake disc worn, pitted or scored, but not seriously weakened Lipped. (3.5.1i)

Central Rear Brake pad(s) wearing thin (3.5.1g)

Central Rear brake disc worn, pitted or scored, but not seriously weakened Corroded. (3.5.1i)

Emissions too low to record.

Diesel smoke to clean to regiester

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre has damage to inner sidewall

Offside Rear Tyre worn close to the legal limit 245/40/18 (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

exhaust heat shields,undertrays and engine covers fitted as standard,obscuring some testable components.

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

exhaust heat shields,undertrays and engine covers fitted as standard,obscuring some testable components.