MOT Status
ExpiredMileage
102,995 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
vehicle covered in underseal
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
under side of vehicle covered in sealant unable to fully inspect
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Headlamp aim too low (4.1.2 (a))
Oil leaking continuously from engine posing a serious risk to road safety ENGINE OIL LEAK [MAJOR] (8.4.1 (a) (ii)) DANGEROUS
Brake fluid warning lamp illuminated (1.1.10 (f))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened BOTH FRONT BRAKE DISCS (1.1.14 (a) (ii))
Oil leak, but not excessive ENGINE OIL (8.4.1 (a) (i))
Oil leak, but not excessive GEARBOX (8.4.1 (a) (i))
RED EML LIGHT ON
ENGINE OIL LIGHT ON
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Offside Integral body structure is deformed and structural rigidity is significantly reduced CILL REPAIRED WITH FILLER ? (6.1.1 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened BOTH FRONT BRAKE DISCS (1.1.14 (a) (ii))
Oil leak, but not excessive ENGINE OIL (8.4.1 (a) (i))
Oil leak, but not excessive GEARBOX (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak ()
under trays fitted (unable to fully inspect)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear rear brake excessively fluctuating (3.7.B.3)
Parking brake lever has no reserve travel (3.1.6b)
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak ()
Rear Brake pad(s) wearing thin (3.5.1g)
under trays fitted (unable to fully inspect)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded strut turret (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded strut turret (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded strut turret (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded strut turret (2.4.A.3)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Oil leak ()
Parking brake lever has little reserve travel (3.1.6b)
heavy surface corrosion on underside
Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
oil leak
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Steering rack gaiter split (2.2.D.2d)
Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
oil leak
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
all tyres heavily perished and cracked
heavy surface corossion to underside
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
all tyres heavily perished and cracked
heavy surface corossion to underside
Engine covers fitted obscuring some components in the engine bay
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Oil leak
Under-trays fitted obscuring some underside components
both front and nearside rear tyres heavily perished and cracked
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
fuel pipes corroded
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Oil leak
Under-trays fitted obscuring some underside components
both front and nearside rear tyres heavily perished and cracked
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
exhaust corroded/deteriorated
fuel pipes corroded
nearside rear body panel corroded and holed[not structural prescribed area]
offside rear body panel corroded and holed[not structural prescribed area]
Fuel pipe/s corroded
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Under-trays fitted obscuring some underside components
both front tyres perishing
n/s/r tyre perishing
parts of suspension corroded and bushes starting to perish
sills covered with underseal
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Fuel pipe/s corroded
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Under-trays fitted obscuring some underside components
both front tyres perishing
n/s/r tyre perishing
parts of suspension corroded and bushes starting to perish
sills covered with underseal
Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
Fuel pipe/s corroded
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
damage to o/s/r tyre sidewall
front tyres starting to perish
slight surface corrosion to underside
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Headlamp aim too high (1.8)
Nearside rear brake binding (3.7.B.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too high (1.8)
Fuel pipe/s corroded
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
damage to o/s/r tyre sidewall
front tyres starting to perish
slight surface corrosion to underside
Offside Rear Lower Suspension arm has slight play in a ball joint (2.4.G.2)
hand brake close to no reserve travel
heavy surface corrosion on parts of underside
nearside front flexi hose not located with pin
unable to check all brake pipes due to covers
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.5c)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
hand brake close to no reserve travel
heavy surface corrosion on parts of underside
nearside front flexi hose not located with pin
unable to check all brake pipes due to covers
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.5c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Toyota MR2?
Based on 602,130 MOT tests across 48,586 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
JBZ 1220 is a 1993 Toyota MR2 in White with a 1,998cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 43.5%.
Across all 1993 Toyota MR2 models, the average MOT pass rate is 64.7% with a typical mileage of 109,025 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota MR2 fails its MOT is parking brake: efficiency below requirements, accounting for 36,842 recorded failures. If you're considering buying JBZ 1220, it's worth having these areas checked by a mechanic before committing.
The Toyota MR2 typically stays on UK roads for around 40 years. At 33 years old, this Toyota MR2 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of JBZ 1220?
You can check the full history of JBZ 1220 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was JBZ 1220 registered?
JBZ 1220 is a 1993 Toyota MR2, first registered on 31 December 1993.
Is JBZ 1220 safe to buy?
The MOT history for JBZ 1220 shows 23 tests with a 43.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does JBZ 1220 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on JBZ 1220. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.