2005 Jaguar Xj

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Rear Registration plate does not conform to the specified requirements Incorrect Spacing (0.1 (d))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Power steering fluid level below minimum (2.1.5 (b) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material Flexi pipe (1.1.11 (c))

Nearside Rear Upper Suspension arm ball joint dust cover severely deteriorated inner rear (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material flexi pipe (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement outer bush deteriorated (5.3.4 (a) (i))

Nearside Rear Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords outer sidewall cracking (5.2.3 (d) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement outer bush deteriorated (5.3.4 (a) (i))

Nearside Rear Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Nearside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Engine upper and lower covers fitted obscuring view to some components

Offside Front section of subframe corroded but not seriously weakened

Offside Rear tyre worn low on inner edge of tread

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Inner Rear Lower Suspension arm has slight play in a pin/bearing (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside rear tyre cracking

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

BOTH FRONT TYRES WEARING ON INNER EDGES

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)