1982 Rover Mini

Electrical wiring inadequately secured wires loose in engine bay (4.11 (a) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component corroded but not seriously weakened outer sill (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Driver's seat insecure floor corroded, under vehicle (6.2.5 (a) (ii)) DANGEROUS

Electrical wiring inadequately secured wires loose in engine bay (4.11 (a) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Suspension component corroded but not seriously weakened outer sill (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pedal anti-slip provision missing (1.1.2 (c))

Nearside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor rear of sub frame (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage loose reel (7.1.1 (b))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Seat belt anchorage loose reel (7.1.1 (b))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting point (5.3.6 (a) (i))

Driver's seat insecure floor corroded (6.2.5 (a) (ii)) DANGEROUS

Electrical wiring inadequately secured numerous loose wires in engine bay (4.11 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor rear of sub frame (5.3.6 (a) (i))

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected valance inner, sub frame mounting (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS

All direction indicators flashing less than 60 times a minute (4.4.4 (a))

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

high front brake imbalance

wiper blades poor

Main beam 'tell-tale' not working (1.7.4c)

Nearside Headlamp aim too high (1.8)

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp emits other than a steady red light (1.2.1e)

Offside Headlamp aim too high and too far to the right. (1.8)

Offside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Stop lamp emits other than a steady red light (1.2.1e)

Rear fog lamp not working (1.3.2b)

All indicators flash very slowly

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Noise from offside rear tyre when in brake rollers

Windscreen washer provides insufficient washer liquid (8.2.3)

wiper blades poor

both headlamps just met pattern criteria ./

exhaust securing bracket corroding

n/s/ headlamp slightly loose ./

Nearside Rear Subframe mounting prescribed area is excessively corroded subframe mount area ./ (2.4.A.3)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Lower Front suspension has excessive play in a lower suspension ball joint ball joint (2.5.B.1a)

Nearside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

both front flexi ble hoses evidence of chaffing ./

both front headlamps just met pattern criteria ./ n/s/ slightly loose ./

o/s/r sidelamp bulb starting to show white ./

slight dislocation of os / front subframe mount ./

both front tyres inner edges bold ./ n/s/f outer sidewall damage ./

o/s/f door fixing bolt adrift

residue cor weep from outer n/s/ cv gaiter

slight play in n/s/ f bottom ball joint slight play in n/s/ r radius arm ./

slight smearing o/s/f wiper ./

Nearside Front Steering rack gaiter split (2.2.D.2d)

o/s/f door fixing bolt adrift

residue cor weep from outer n/s/ cv gaiter

both front tyres inner edges bold ./ n/s/f outer sidewall damage ./

slight play in n/s/ f bottom ball joint slight play in n/s/ r radius arm ./

slight smearing o/s/f wiper ./

Nearside Rear Radius arm severely distorted (2.4.G.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside front brake application uneven (3.7.B.2)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

passenger door does not latch securely closed (6.2.B.1a)