MOT Status
ExpiredMileage
64,943 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Direction indicators not working (1.4.A.2c)
Exhaust emissions hydrocarbon content excessive (7.3.B.1b)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Stop lamp not working (1.2.1b)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Radius arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brakes imbalanced across an axle (3.7.B.5b)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front wheel bearing has slight play (2.5.A.3c)
engine stabiliser bracket broken
front valance rusty
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Drag link end ball joint has slight play (2.2.B.1f)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Nearside Suspension arm has slight play in a ball joint (2.4.G.2)
os and ns front inner arch rusty
os front outer sill corroded outside of prescribed area
several areas of local corrosion appearing on underside of vehicle
wiper switch worn
Emissions not tested (7.0)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.B.1)
Horn not working (1.6.2a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Drag link end ball joint has slight play (2.2.B.1f)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Nearside Suspension arm has slight play in a ball joint (2.4.G.2)
os and ns front inner arch rusty
os front outer sill corroded outside of prescribed area
several areas of local corrosion appearing on underside of vehicle
wiper switch worn
front valance corroded both sides
light corrosion in the rear subframe
steel fuel pipe corroded at rear
Stop lamp not working (1.2.1b)
Brakes imbalanced across an axle (3.7.B.5b)
Direction indicators not working (1.4.A.2c)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Exhaust emissions hydrocarbon content excessive (7.3.B.1b)
Horn not working (1.6.2a)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Headlamp aim too low (1.8)
Offside Rear fog lamp not working (1.3.2b)
Rear Exhaust system not adequately supported (7.1.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
front valance corroded both sides
light corrosion in the rear subframe
steel fuel pipe corroded at rear
Parking brake: efficiency below requirements (3.7.B.7)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Nearside Steering rack gaiter split (2.2.D.2d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too low (1.8)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
engine/gearbox mounting(s) defective
How Reliable is the Austin Morris Mini 1000?
Based on 9,311 MOT tests across 1,335 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
JPR 415V is a 1980 Austin Morris Mini 1000 in Red with a 998cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 1980 Austin Morris Mini 1000 models, the average MOT pass rate is 65.4% with a typical mileage of 54,353 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Morris Mini 1000 fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 726 recorded failures. If you're considering buying JPR 415V, it's worth having these areas checked by a mechanic before committing.
The Austin Morris Mini 1000 typically stays on UK roads for around 48 years. At 46 years old, this Austin Morris Mini 1000 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of JPR 415V?
You can check the full history of JPR 415V by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was JPR 415V registered?
JPR 415V is a 1980 Austin Morris Mini 1000, first registered on 28 June 1980.
Is JPR 415V safe to buy?
The MOT history for JPR 415V shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does JPR 415V have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on JPR 415V. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.