2002 Fiat Ducato

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to subframe mounting (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to subframe mounting (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Position lamp switch does not illuminate the front and rear position lamps with a single operation (4.2.2 (a))

Power steering pipe/hose modification unsafe pipe insecure on engine (2.1.5 (f) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output x 2 (4.1.4 (b))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive middle inner sill (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material x 2 (1.1.11 (c))

middle exhaust slight corroded

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member in various places (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch in various places (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch in various places (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch near flex brake pipes (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and inner (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill in various places (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member in various places (5.3.6 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output x 2 (4.1.4 (b))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive middle inner sill (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material x 2 (1.1.11 (c))

middle exhaust slight corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch lower (5.3.6 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger at front doorstep (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch at rear (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch in various places (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x-member (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill in various places (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength middle x-member at front of rear spring (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength middle x-member at middle of rear spring (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

clutch pipe corroded

exhaust corroded

fluid leak at front

handbrake just met requirements

n/s rear shocker casing corroded

p/s pipes corroded

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x-member (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear of rear spring (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

n/s rear shocker casing corroded

p/s pipes corroded

fluid leak at front

handbrake just met requirements

clutch pipe corroded

exhaust corroded

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill all way along and out riggers in various places (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of rear inner area at rear of rear spring (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor all way along and out riggers in various places (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Front Fluid leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

clutch pipe corroded

exhaust slight corroded

power steering pipes slight corroded

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Upper Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

corrosion on underside of vehicle

underside rusty in places

extensive patch repairs on underside

front brake discs getting thin

underside very rusty in places

Offside front brake binding (3.7.B.1)

extensive patch repairs on underside

front brake discs getting thin

underside very rusty in places

Brake load sensing valve seized (3.6.E.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside front brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Suspension component mounting prescribed area is excessively corroded rear valance (2.4.A.3)

rear brake application uneven (3.7.B.2)

front brake discs getting thin

nearside rear brake disc rusty

underside very rusty in places

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Parking brake lever ratchet mechanism is excessively worn (3.1.5)

ADVISORY MAIN EXHAUST BOXES CORRODED

Brake load sensing valve stiff (3.6.E.3)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Fuel system component leaking (7.2.3)

Fuel system component leaking (7.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Rear Brake pad(s) wearing thin (3.5.1g)

light scrathes on screen

rear of van lined out with timber

slight damage o/s/r tyre sidewall

surface corrosion to clutch pipe

Exhaust has part of the system excessively deteriorated (7.1.1a)