1980 Volkswagen Caravelle

surface corrosion throughout under side

surface corrosion throughout under side

underside and components have surface corrosion throughout

Corrosion to various parts under vehicle

Nearside Front Play in steering rack inner joint(s) ()

Corrosion to front floor areas

Corrosion to front sills/outriggers

Corrosion to various places

Corrosion by lower steering column pivot

Corrosion to Offside rear chassis rail by coil spring mount

Offside front upper ball joint rubber deteriorating

Nearside Front Seat belt anchorage prescribed area is excessively corroded outer, lower mounting area (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail by coil spring (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch/sill end (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Stop lamp not working (1.2.1b)

Vehicle Identification Number not permanently displayed (6.3.5.a)

Corrosion O/S/R outer sill by coil spring

Corrosion by lower steering column pivot

Corrosion to front floor areas

Corrosion to front sills/outriggers

Corrosion to various places

O/S/F upper ball joint rubber deteriorating

Nearside rear and the offside rear body seals are corroded but are deemed to be excessive.

Underbody has corrosion in a number of areas but is not within 30cm of a prescribed area or body mountings and does not effect braking or steering.

Offside rear and Nearside rear seals are corroded but are not deemed to be excessive.

Underbody has corrosion in a number of areas but is not within 30cm of a prescribed area.

Horn not working (1.6.2a)

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

o/s/r outer cv gaitour split

slight play in nearside front inner rack jiont

Fuel cap/sealing device sealing washer torn (7.2.4c)

Horn not working (1.6.2a)

Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Headlamp aim too low (1.8)

Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim too low (1.8)

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

HEAVY corrosion and holes in both front inner sills not within prescribed areas at jacking points

HEAVY corrosion and holes in rear panel not weaking structure

HEAVY corrsion and holes in nearside rear lower panel not within prescribed areas

HEAVY corrsion and holes in offside rear inner wheel arch/box section not within prescribed areas

HEAVY corrsoion and holes in nearside front step not within prescribed areas

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

chip to screen outside swept area

corrosion and hole in both front lower inner wheel arches not within prescribed areas

corrosion to both front inner and outer wheel arches

corrosion to both rear inner and outer wheel arches

corrosion to offside front step

corrosion to offside inner sill and hole in offside inner sill not within prescribed areas

general undervehicle body corrosion

offside rear outer cv gatior split

play in steering rack

slight play in nearside front anti roll bar drop link

stickers to windscreen obscured by rear view mirror and below line of wiper

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front front brake binding (3.7.B.1)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear front brake binding (3.7.B.1)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

serious oil leak from engine

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

front compliance bushes split and deteriorating

o/s/f anti roll bar link bush deteriorated