1996 Mazda MX-5

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security middle off sill (6.2.2 (d) (i))

Offside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Fuel Pipe/s corroded front to rear ()

Nearside Headlamp aim too low (1.8)

Nearside Rear Braking system leaking brake pipe (3.6.A.1)

Offside Headlamp aim too high (1.8)

Offside Rear Mechanical brake component has restricted free movement brake binding (3.5.1k)

Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Fuel Pipe/s corroded front to rears ()

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe excessively corroded union to nearside rear flexi (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside rear brake excessively fluctuating (3.7.B.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

both rear chassis rails pushed up

brake disc slightly pitted (3.5.1h)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim too high (1.8)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Registration plate lamp not working (1.1.5c)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.5c)

Parking brake: efficiency below requirements (3.7.B.7)

both rear chassis rails pushed up

offside chassis rail pushed up

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

offside chassis rail pushed up

Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tie bar/rod attachment bracket/mounting bolt missing (2.4.G.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)