2003 Lexus IS200

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Oil leaking excessively from engine (8.4.1 (a) (i))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear brake shoe mounting plate corroded

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear brake shoe mounting plate corroded

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear suspension components corroded

Power steering malfunctioning (2.1.5 (a))

Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength both bolt mounts holed (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush excessively worn arm bush (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn arm bush (5.3.4 (a) (i))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

nearside and offside rear lower subframe support bars badly corroded

rear brake discs corroded

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside front lower ball joint cover split

Front registration plate displaying a honeycomb or similar effect background (6.3.3)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate displaying a honeycomb or similar effect background (6.3.3)

Nearside front lower ball joint cover split

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front tyres worn on inner edge

rear discs slightly corroded

rear pads wearing thin

Front Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Rear registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Subframe mounting prescribed area modified, but not inappropriately (2.4.A.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

front tyres worn on inner edge

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Sub-frame synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm slightly distorted (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension arm slightly distorted (2.4.G.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Registration plate lamp not working (1.1.C.1d)

registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

offside rear brake disc corroding

plastic under trays fitted

Nearside Front Headlamp aim too low and too far to the left. (1.8)

Offside Front Headlamp aim too low (1.8)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Nail in nearside rear tyre

Offside Front Brake pad(s) wearing thin (3.5.1g)

offside rear brake disc corroding

plastic under trays fitted

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Nearside Front position lamp(s) not working (1.1.A.3b)