1993 Mitsubishi Coupe

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front coil spring broken (2.4.C.1a)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Coil spring not correctly located (2.4.C.2)

Front registration plate with character(s) which are not of equal width along their entire length (6.3.4a)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Rear registration plate with character(s) which are not of equal width along their entire length (6.3.4a)

Exhaust noisy (7.1.4)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Fuel pipe/s corroded

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pipe excessively corroded (3.6.B.2c)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Rear fog lamp not working (1.3.2b)

Fuel pipe/s corroded

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear fog lamp missing (1.3.2a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) not working (1.1.A.3b)

Centre Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Centre Rear Exhaust system not adequately supported (7.1.1)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Outer Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp aim too high (1.8)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear registration plate background overprinted or shadowed with text (6.3.1e)

Centre Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear Rear fog lamp not working (1.3.2b)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)