1993 Citroen C15

Coil spring corroded both rears (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pedal anti-slip provision missing (1.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / turret (5.3.6 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member behind rear wheel (5.3.6 (a) (i))

Coil spring corroded both rears (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive center cross member (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake pedal anti-slip provision missing (1.1.2 (c))

Horn not working (7.7 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive center cross member (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Stop lamp(s) not working when side lights on (4.3.1 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner wing has corrosion (6.2.2 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Drive shaft joint constant velocity boot severely deteriorated inner and outer (6.1.7 (g) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bulk head (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired shock absorber mount (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bulk head (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is inadequately repaired bulk head (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Drive shaft joint constant velocity boot severely deteriorated inner and outer (6.1.7 (g) (i))

Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security bulk head area o s (6.2.2 (d) (i))

Nearside Front cv boot slight split

Nearside Rear Tyre slightly damaged/cracking or perishing inner edge starting to crack on sidewall (5.2.3 (d) (ii))

advise both front tyres starting to crack on outer edges

both front head lamps starting to corrode

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Headlamp insecure (4.1.1 (c))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar (7.1.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper not working (3.4 (a))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front cross-member corroded and holed, outside of a prescribed area

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front chassis leg/inner wheel arch area corroded and holed, just outside of a prescribed area

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Rear cross-member corroded and holed, outside of a prescribed area

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))

Front cross-member corroded and holed, outside of a prescribed area

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front chassis leg/inner wheel arch area corroded and holed, just outside of a prescribed area

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Rear cross-member corroded and holed, outside of a prescribed area

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside front brake application uneven lazy (3.7.B.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Windscreen wiper not operating automatically when switched on (8.2.1b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside front brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

oil leaks

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Side repeater not working (1.4.A.2c)

engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

oil leaks

both side rear chassis sections corroded

n/s/f chassis section corroded

o/s/r tyre has cracks in outer sidewall.

passenger sun visor will not stay up.

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

corrosion to rear cross member

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Side repeater not working (1.4.A.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

1. Rear crossmember has corrosion in btoh ends

Centre Windscreen wiper blade deteriorated (8.2.2)

Horn not working (1.6.2a)

1. Rear crossmember has corrosion in btoh ends