1993 Land Rover Defender

Brake pipe corroded, covered in grease or other material all metal pipes (1.1.11 (c))

chassis heavily undersealed and difficult to inspect

seat box has corosion around securing bolts but not conciddered exessive

Brake lever has insufficient reserve travel hand brake (1.1.2 (a))

Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))

Lower Steering column universal joint has excessive wear or play (2.2.2 (c))

Brake pipe corroded, covered in grease or other material all metal pipes (1.1.11 (c))

Drag link end ball joint has slight play (2.1.3 (b) (i))

Nearside Headlamp aim too far to the left (4.1.2 (a))

Nearside door mirror cracked

Offside Headlamp aim too low (4.1.2 (a))

chassis heavily undersealed and difficult to inspect

front exhaust heat shield insecure

seat box has corosion around securing bolts but not conciddered exessive

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

could not fully inspect due to underseal

Brake pedal anti-slip provision missing (1.1.2 (c))

Windscreen washer not working (3.5 (a))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

could not fully inspect due to underseal

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Upper Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

tank bracket corroded

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded trailing arm mounting (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Axle swivel joint has slight play (2.5.A.3b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Headlamp aim too high (1.8)

Power steering component(s) has slight seepage from a seal (2.3.3b)

Power steering component(s) has slight seepage from a seal (2.3.3b)

N/S Drag link end cover split.

Nearside Drag link end ball joint has slight play (2.2.B.1f)

Nearside Headlamp aim too low (1.8)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Offside Headlamp aim too far to the right (1.8)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Ball joint has slight play (2.2.B.1f)

Nearside Front Ball joint has slight play (2.2.B.1f)

Offside Headlamp aim beam image too far to the right (1.6.B4)