1992 Mazda 323

Both rear inner wheel arch corroded

N/S/R outer sill fill and under repair not checked

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

offside front wiper blade rubber split but clearing ok

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

offside front wiper blade rubber split but clearing ok

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Both rear tyres tread cuts

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Rear coil spring corroded (2.4.C.1b)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not working (1.1.5c)

Engine oil leak

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside rear tyre has three punctures

Rear registration plate deteriorating

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage fractured (2.4.G.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Engine oil leak

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside rear tyre has three punctures

Rear registration plate deteriorating

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Registration plate lamp not working (1.1.5c)