1996 Honda Civic

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

surface corrosion to inner sills previously repaired

Front Brake disc worn, pitted or scored, but not seriously weakened 2 (1.1.14 (a) (ii))

Nearside Front Shock absorbers has a slightly worn bush bottom bush (5.3.2 (c))

Offside Front Shock absorbers has a slightly worn bush bottom bush (5.3.2 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

heavy corrosion to front chassis legs not excessive yet

surface corrosion to inner sills previously repaired

vehicle under sealed

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Front Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))

Front Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))

Nearside Front Position lamp not working Side Light (4.2.1 (a) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chalked in Yellow (Sill/Floor) (6.2.2 (d) (i))

Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced Sill (6.1.1 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Fuel Pipe/s corroded ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Underbody Covered in Underseal

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

osf and nsf suspension arm bushes deteriated

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

osf and nsf suspension arm bushes deteriated

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm corroded but ok at this time (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm corroded but ok at this time (5.3.4 (a) (i))

Offside Front Outer deteriated

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Suspension arm pin or bush worn but not resulting in excessive movement front and rear (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm corroded but ok at this time (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement arm corroded but ok at this time (5.3.4 (a) (i))

Offside Front Outer deteriated

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Suspension arm pin or bush worn but not resulting in excessive movement front and rear (5.3.4 (a) (i))

Offside Steering rack gaiter deteriorated split at outer end (2.2.D.2d)

Front registration plate delaminated (6.3.1d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Offside Steering rack gaiter deteriorated split at outer end (2.2.D.2d)

Nearside Front brake pipe slight corrosion . hose end

Offside Front brake pipe slight corrosion, hose end

Nearside Front brake pipe slight corrosion . hose end

Offside Front brake pipe slight corrosion, hose end

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front front brake binding (3.7.B.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

fuel pipes corroded

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Headlamp not working on main beam (1.7.5a)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside front brake juddering slightly (3.7.A.2b)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)