1992 Fiat Tipo

Exhaust has a minor leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Radius arm synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Radius arm synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside rear tyre perished

Rear Sub-frame synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

coolant leak(metal pipe at back of cylinder head)

engine damp with oil

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Side repeater not working (1.4.A.2c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside rear tyre perished

Rear Sub-frame synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

coolant leak(metal pipe at back of cylinder head)

engine damp with oil

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Fuel cap/sealing device sealing washer missing (7.2.4c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever, pawl mechanism pivots or their associated mountings are insecure (3.1.4b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)