1993 Honda Concerto

Body has slight corrosion (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Bonnet retaining device ineffective (8.4.2)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Body has slight corrosion (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Both rear tyres perished, no cords/ply showing

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Radiator poor

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear number plate faded

Wiper mechanism poor

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear Stop lamp not working (1.2.1b)

Both rear tyres perished, no cords/ply showing

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Radiator poor

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear number plate faded

Wiper mechanism poor

Both rear tyres perished. No cords/ply showing

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside rear tyre on 2mm on outer edge

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear Registration plate lamp not working (1.1.C.1d)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Both rear tyres perished. No cords/ply showing

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside rear tyre on 2mm on outer edge

Nearside Stop lamp not working (1.2.1b)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)