1992 Honda ST1100

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened swing arm (5.3.3 (b) (i))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Motorcycle structure is deformed but structural rigidity is not significantly reduced frame (6.1.1 (a) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Nearside Front Brake disc contaminated (1.1.14 (b))

Nearside Front Shock absorber has a serious fluid leak fork (5.3.2 (b))

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Motorcycle structure is deformed but structural rigidity is not significantly reduced frame (6.1.1 (a) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front 120/70/ZR18/59W 2mm.

Front 125Kg. Rear 180Kg.

Rear 160/70/ZR17/73W. 4mm.

Front 120/70/ZR18/59W 2mm.

Front 125Kg. Rear 180Kg.

Front Stop lamp not working (4.3.1 (a) (ii))

Rear 160/70/ZR17/73W. 4mm.

Front 2mm. 120/70/ZR18/59W.

Front Roller brake test indicates slight fluctuation of brake effort Slight bdrag. (3.3.A1d)

Rear 1.5mm. 160/70/ZR17.73W.

Rear Roller brake test indicates a slightly juddering brake Slight drag. (3.3.A1b)

2mm. 160/70/ZR17/73W.

3mm. 120/70/ZR18/59W.

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

F 125Kg. R 180Kg.

Front 3mm. 120/70/ZR18. Rear 3mm. 160/70/ZR17.

110/80/18/58W 1.5mm.

160/70/17. 1.5mm.

Front Tyre worn close to the legal limit (4.1.3(ii))

Front pads serviceable.

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear caliper slight drag.

Front Tyre worn close to the legal limit (4.1.3(ii))

Oil leak

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Nearside Front Brake disc(s) cracked (3.2.A1g)

Front Tyre worn close to the legal limit (4.1.3(ii))

Oil leak

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Oil leak

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

rear brake disk badly worn

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Floor brake test indicates a binding brake (3.3.C2c)

Nearside Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

rear brake disk badly worn

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension slightly corroded (2.4.A.2d)

n/s dip beam not working

rear brake disk worn/scored

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front wheel bearings are excessively rough (2.3.5b)

Offside Front Direction indicator deteriorated and function impaired (1.5.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Floor brake test indicates a sticking brake (3.3.C2c) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

h/bar gripps worn

Nail in rear tyre

Offside Front Brake disc(s) is slightly distorted (3.2.A1m)

Rear Brake disc(s) slightly worn (3.2.A1l)

front brake rubbing

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Nearside Footrest insecure (6.2.1a) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Rear Floor brake test indicates a binding brake (3.3.C2c) DANGEROUS