1992 Rover Metro

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Outer sills slightly corroded

Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Slight coolent leak

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))

Coolant leak ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Rear Subframe mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))

sills slightly corroded

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Central Rear Surface corrosion to body

Exhaust has a minor leak of exhaust gases Centre box / back box have holes in them (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Central Rear Surface corrosion to body

Exhaust has a minor leak of exhaust gases Centre box / back box have holes in them (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

surface corrosion underside of vehicle

Battery leaking (4.13 (b))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

surface corrosion underside of vehicle

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill areas (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill areas (5.3.6 (a) (i))

inner back panel corroded

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill areas (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner and outer sill areas (5.3.6 (a) (i))

inner back panel corroded

corrosion starting on n/s and o/s outer sills.

both rear tyres perished,

Offside Front suspension low

Offside Rear suspension low

corrosion starting on some undeside components

high travel at park-brake lever

Service brake efficiency below requirements (1.2.2 (a) (i))

corrosion starting on some undeside components

high travel at park-brake lever

rear cross panel, corroded (in front of rear bumper)

rear tyres perished

Nearside Front Upper Brake pipe slightly corroded (3.6.B.2c)

Offside Front Upper Brake pipe slightly corroded (3.6.B.2c)

both rear tyres perished (old age)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear fog lamp not working (1.3.2b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Fluid suspension has no suspension movement (2.4.D.5)

Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Rear Stop lamp not working (1.2.1b)

both rear tyres slightly perished

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Vehicle structure has slight corrosion (6.1.B.2)