1993 Cagiva Mito

Fairings insecure but not likely to impede the steering top fairing (2.1.2e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

both handlebars bent

one rear tail light out

Offside Rear Footrest insecure (6.2.1a)

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate insecure (6.3.1b)

Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Throttle operating incorrectly sticky on release (6.2.1f)

Drive chain slightly loose (6.2.1d)

Fairings insecure but not likely to impede the steering top fairing (2.1.2e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

both handlebars bent

one rear tail light out

Headlamp aim too low (1.6)

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Nearside Steering lock stop ineffective (2.1.3)

Offside Steering lock stop ineffective (2.1.3)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

o/s rear position lamp does not illuminate

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering headbearing has slight free play (2.2.2)

o/s rear position lamp does not illuminate

Drive chain excessively tight (6.2.1d)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear reflector on motorcycle missing (1.4.1)

Nearside Front Upper Fairings insecure but not likely to impede the steering (2.1.2e)

O/S rear position lamp does not illuminate

Rear wheel spoke cover loose

Upper fork yoke hitting fairing bracket in full lock

Drive chain slightly loose (6.2.1d)

Drive chain slightly loose (6.2.1d)

Nearside Rear Footrest insecure (6.2.1a)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Stop lamp remains on when the brake is released (1.3.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

exhaust is rubbing slightly on swingarm

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Registration plate insecure (6.3.1b)

exhaust is rubbing slightly on swingarm

Rear Drive chain slightly loose (6.2.1d)

Front Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too low (1.6)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Registration plate margin less than the minimum requirement (6.3.4g)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)