1993 Mazda MX-5

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill within prescribed areas of seat and seat belt mounting. Outer skin of sills corroded inner skin still structurally sound. (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component corroded but not seriously weakened All underside suspension components and mounting prescribed areas (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component corroded but not seriously weakened Front and rear subframes and surrounding suspension arms corroded (5.3.3 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material rear (1.1.11 (c))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Seal (6.1.1 (c) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe corroded, covered in grease or other material rear (1.1.11 (c))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Seal (6.1.1 (c) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp aim not tested (4.1.2 (b))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Central Exhaust mounting defective broken rubber (6.1.2 (a))

Fuel Pipe/s corroded ()

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Emissions not tested aborted due to over heating (8.2.1.2 (d))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

nearside front tyre has cracking on outer sidewall

rear brake discs corroded

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Rear fog lamp not working (1.3.2b)

nearside front tyre has cracking on outer sidewall

rear brake discs corroded

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nearside rear tyre has a screw in it

Drivers wiper blade starting to split.

Front Brake pad(s) wearing thin (3.5.1g)

BOTH REAR TYRE OUTER WALLS PERISHED/CRACKING.

OSF TYRE OUTER WALL PERISHED/CRACKING

REAR BRAKE PADS GETTING LOW.