MOT Status
ExpiredMileage
242,030 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Central Exhaust mounting defective (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
both inner ana outer sills soft
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Central Exhaust mounting defective (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
both inner ana outer sills soft
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Both inner and outer sills corroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Parts of underside covered in wax oil
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Both inner and outer sills corroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Offside Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Offside Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Rear Road wheel fixing missing (5.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Road wheel fixing missing (5.2.1 (a) (i))
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Road wheel fixing missing (5.2.1 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Central Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Service brake grabbing severely (1.2.1 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Registration plate inscription illegible (0.1 (b))
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Coil spring corroded both front (5.3.1 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
rear exhaust flexi pipe slightly deteriorated
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under vehicle and outer sill (5.3.6 (a) (i))
Coil spring corroded both front (5.3.1 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
rear exhaust flexi pipe slightly deteriorated
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Oil leak ()
nearside and offside rear wheel arches corroded
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Lower Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
o/s and n/s inner and outer sills corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Battery insecure (1.9.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
battery insecure
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Statutory seat belt missing (5.1.1)
Offside Rear Rear fog lamp has less than 50% of the light sources illuminating (1.3.2b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
battery insecure
Offside Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Sub-frame slightly distorted (2.4.G.1)
Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Sub-frame slightly distorted (2.4.G.1)
Offside Rear Wheel nut(s) missing (4.2.A.1e)
Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Registration plate lamp not working (1.1.C.1d)
Offside Rear fog lamp missing (1.3.2a)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K400 WAL is a 1996 Mazda Bongo in White with a 2,500cc diesel engine. This vehicle has been through 31 MOT tests with a personal pass rate of 54.8%.
Across all 1996 Mazda Bongo models, the average MOT pass rate is 65.9% with a typical mileage of 133,482 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying K400 WAL, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 30 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K400 WAL?
You can check the full history of K400 WAL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K400 WAL registered?
K400 WAL is a 1996 Mazda Bongo, first registered on 31 December 1996.
Is K400 WAL safe to buy?
The MOT history for K400 WAL shows 31 tests with a 54.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K400 WAL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K400 WAL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.