1992 Honda CD250U

Front Brake disc worn, pitted or scored, but not seriously weakened worn (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Throughout (6.1.1 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Steering headbearing slightly stiff or notchy Very slight notch (2.2.2 (f) (i))

Wheel alignment slightly misaligned Handlebar (2.4 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened worn (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Headlamp aim too low (4.1.2 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Throughout (6.1.1 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Steering headbearing slightly stiff or notchy Very slight notch (2.2.2 (f) (i))

Wheel alignment slightly misaligned Handlebar (2.4 (a))

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced swing arm (6.1.1 (c) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

slight cracking on front tyre

Centre Front Headlamp aim too high (1.6)

Centre Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

slight cracking on front tyre

Front tyre cracking.

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Exhaust slightly deteriorated (7.1.1a)

light cracking on front tyre.

light cracking on rear tyre.

rust forming on rear spokes.

Rear Brake locking device missing (3.2.A1e)

Registration plate margin less than the minimum requirement (6.3.4g)

Exhaust slightly deteriorated (7.1.1a)

light cracking on front tyre.

light cracking on rear tyre.

rust forming on rear spokes.

Rear wheel spindle securing nut(s) loose (2.4.A.2b)