MOT Status
ExpiredMileage
114,837 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Rear fog lamp not working (1.3.2b)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside front seat belt twisted
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside front seat belt twisted
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Registration plate lamp shows direct white light to the rear (1.1.C.1f)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt retracting mechanism defective (5.2.5b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
rear wiper blade deteriorating
slight damage to nearside rear lamp
Nearside Front Seat belt retracting mechanism defective (5.2.5b)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Seat belt retracting mechanism defective (5.2.5b)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Registration plate lamp not working (1.1.C.1d)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
rear wiper blade deteriorating
slight damage to nearside rear lamp
Stop lamp adversely affected by the operation of another lamp (1.2.1f)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
centre exhaust box split and blowing
Nearside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
How Reliable is the Nissan Primera?
Based on 1,768,156 MOT tests across 199,016 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K416 BDW is a 1993 Nissan Primera in Blue with a 1,592cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 1993 Nissan Primera models, the average MOT pass rate is 61.4% with a typical mileage of 104,029 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Primera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 96,181 recorded failures. If you're considering buying K416 BDW, it's worth having these areas checked by a mechanic before committing.
The Nissan Primera typically stays on UK roads for around 35 years. At 33 years old, this Nissan Primera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K416 BDW?
You can check the full history of K416 BDW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K416 BDW registered?
K416 BDW is a 1993 Nissan Primera, first registered on 10 May 1993.
Is K416 BDW safe to buy?
The MOT history for K416 BDW shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K416 BDW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K416 BDW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.