MOT Status
ExpiredMileage
85,238 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
nsf tyre staring to crack
corrosion front suspension mounting areas
corrosion n-s front inner step
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear fog lamp missing (4.5.1 (a) (ii))
Steering component mounting prescribed area is excessively corroded within 30cm of steering box. front valance panel (2.1.2 (e) (i))
corrosion front suspension mounting areas
corrosion n-s front inner step
Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Drag link end ball joint has slight play (2.2.B.1f)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Drag link end ball joint has slight play (2.2.B.1f)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive bump stop (2.4.A.3)
Steering system has slight free play detected at steering wheel (2.2.A.1a)
Nearside Front Suspension spring mounting prescribed area is excessively corroded front of spring inner sill (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Nearside front brake binding (3.7.B.1)
Offside Front Suspension spring mounting prescribed area is excessively corroded bump stop (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is inadequately repaired front of leaf spring inner sill (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Offside rear brake binding (3.7.B.1)
Nearside Front Drag link end ball joint has slight play (2.2.B.1f)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Drag link end ball joint has slight play (2.2.B.1f)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive bump stop (2.4.A.3)
Steering system has slight free play detected at steering wheel (2.2.A.1a)
engine cover fitted
parking brake efficiency 16%
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust system not adequately supported (7.1.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside rear brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Steering pivot point has slight play (2.2.B.1g)
Offside Front Steering pivot point has slight play (2.2.B.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Inner Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Steering pivot point has slight play (2.2.B.1g)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Steering pivot point has slight play (2.2.B.1g)
Centre Exhaust system not adequately supported (7.1.1)
Driver's seat insecure (6.2.A.1)
Headlamp aim not tested (1.8.A.1c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Intermediate drop arm damaged and unserviceable (2.2.C.1d)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Inner Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Nearside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
centre exhaust mount rubber missing
Brake performance not tested (3.7.A.1)
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)
Nearside Front An item not tested (Manual)
Nearside Headlamp aim too far to the left (1.8)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front brake binding (3.7.B.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too far to the left (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Brake hose leaking (3.6.A.1) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)
centre exhaust mount rubber missing
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Body has a sharp edge caused by damage (6.1.C.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
front number plate poor condition
Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Steering arm has relative movement at its fixings (2.2.B.1h)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Steering arm has relative movement at its fixings (2.2.B.1h)
all tyres worn and perished
Nearside Steering pivot point has excessive play (2.2.B.1g)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Exhaust system not adequately supported (7.1.1)
Windscreen wiper blade deteriorated (8.2.2)
How Reliable is the Nissan Vanette?
Based on 206,210 MOT tests across 22,429 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K441 BUK is a 1993 Nissan Vanette in White with a 1,952cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 1993 Nissan Vanette models, the average MOT pass rate is 61.1% with a typical mileage of 96,701 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Vanette fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 32,381 recorded failures. If you're considering buying K441 BUK, it's worth having these areas checked by a mechanic before committing.
The Nissan Vanette typically stays on UK roads for around 34 years. At 33 years old, this Nissan Vanette is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K441 BUK?
You can check the full history of K441 BUK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K441 BUK registered?
K441 BUK is a 1993 Nissan Vanette, first registered on 10 June 1993.
Is K441 BUK safe to buy?
The MOT history for K441 BUK shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K441 BUK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K441 BUK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.