1992 Honda Crx

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear brake effort low but within requirements

Emissions not tested due to leak (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn control missing (1.6.1)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front cross member corroded but not excessively

Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak ()

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on main beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

front & rear brake pipes undersealed

front & rear suspension undersealed

n/s & o/s sill covers fitted

Offside Front Headlamp aim too low (1.8)

Offside front brake binding (3.7.B.1)

front brake application uneven (3.7.B.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front & rear brake pipes undersealed

front & rear suspension undersealed

n/s & o/s sill covers fitted

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Headlamp aim too low (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Service brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

both rear tyres cracked and perished recommend replacement

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Front front brake juddering slightly (3.7.A.2b)

radiator in very poor condition

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

front brake juddering severely (3.7.A.2b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

radiator in very poor condition

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Offside Windscreen wiper blade deteriorated (8.2.2)