1992 Rover Mini

Nearside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Tyre slightly damaged/cracking or perishing all 4 (5.2.3 (d) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

no rear seats or seat belts

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust system insecure (6.1.2 (a))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

no rear seats or seat belts

Front Headlamp aim too high (4.1.2 (a))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Brake pedal anti-slip provision missing (3.3.A.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Fuel cap/sealing device sealing washer missing (7.2.4c)

Nearside Front Lower Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Nearside Front Outer Sub-frame attachment bracket/mounting insecure (2.4.G.1)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Outer Sub-frame attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Hydraulic brake cylinder retaining device missing (3.6.A.2d)

Offside Rear fog lamp not working (1.3.2b)

Offside Steering rack gaiter split (2.2.D.2d)

Emissions not tested Exhaust has excess blow from front (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Fuel cap/sealing device missing (7.2.4a)

Horn not working (1.6.2a)

Nearside Front Headlamp aim beam image kick up to the offside (1.8)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Inner Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Rear Sub-frame inappropriately repaired (2.4.A.2)

Nearside Rear Subframe mounting prescribed area is inadequately repaired Outer sill covers fitted but not completed welled round (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed on outer wall (4.1.D.1b)

Offside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Rear Outer Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Subframe mounting prescribed area is inadequately repaired Outer sill covers fitted but not completed welled round (2.4.A.3)

Offside Rear Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Passenger seat(s) missing at time of test

Welded repairs to vehicle.

Wheel/tyre protruding beyond wheel arch

Body has a sharp edge caused by corrosion (6.1.C.1)

Driver's seat insecure (6.2.A.1)

Indicator switch faulty (1.4.A.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Tyre fouling a part of the vehicle (4.1.D.2)

Offside Steering rack gaiter split (2.2.D.2d)

Rear fog lamp not working (1.3.2b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Passenger seat(s) missing at time of test

Welded repairs to vehicle.

Wheel/tyre protruding beyond wheel arch

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)