1993 Fiat Uno

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Seat belt retracting mechanism defective (5.2.5b)

Nearside Stop lamp not working (1.2.1b)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Exhaust has a minor leak of exhaust gases (7.1.2)

Front coil spring corroded (2.4.C.1b)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Rear coil spring corroded (2.4.C.1b)

battery warning light on

corrosion throughout

wiper blade splitting

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear Brake load sensing valve has been disconnected and was fitted as standard (3.6.E.2)

Rear Brake load sensing valve seized (3.6.E.3)

offside and nearside chassis corrosion

suspect fuel tank leak, low fuel warning light on

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded (3.3.A.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Stop lamp not working (1.2.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake pipe inadequately clipped (3.6.B.1)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Direction indicator insecure (1.4.A.2b)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Horn not working (1.6.2a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp aim too high (1.8)

Registration plate lamp not working (1.1.5c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)