2003 Land Rover Discovery

Front Brake pipe corroded, covered in grease or other material both sides in wheel arches (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced centre and rear chassis (6.1.1 (c) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced both sides body mounts behind front wheels (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive strut turret (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut turret (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Oil leak, but not excessive diff (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive gear box (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Vehicle structure is deformed but structural rigidity is not significantly reduced both sides (6.1.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

front radiator support bracket corroded and holed

Nearside Brake pipe excessively corroded front to rear on top of chassis (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around bump stop /split in chassis (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced both sides body mounts behind front wheels (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive strut turret (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut turret (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Oil leak, but not excessive diff (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive gear box (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Vehicle structure is deformed but structural rigidity is not significantly reduced both sides (6.1.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

front radiator support bracket corroded and holed

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sides body mounts behind front wheel are corroded

Front Radiator support bracket is corroded away

Integral body structure is corroded but structural rigidity is not significantly reduced both sides sills (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive strut turret (5.3.6 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut turret (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Oil leak, but not excessive diff (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pipe corroded, covered in grease or other material Both sides into flexis corroded . (1.1.11 (c))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sides body mounts behind front wheel are corroded . (6.2.2 (d) (i))

Front Oil leak, but not excessive Differential . (8.4.1 (a) (i))

Front Radiator support bracket is corroded away .

Front Upper Suspension component corroded but not seriously weakened Both sides , suspension tower rings are considerably corroded . (5.3.3 (b) (i))

Nearside Front Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Badly perished and starting to split . (2.1.3 (g) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Oil leak, but not excessive Engine . (8.4.1 (a) (i))

Oil leak, but not excessive Gearbox . (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced Both sides sills corroded . (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides considerably corroded . (5.3.6 (a) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting Both sides corroded considerably . (6.1.6 (i) (i))

Nearside Front Body component damaged and likely to cause injury Bumper smashed and has sharp edges protruding . (6.2.1 (a) (i))

Nearside Front Brake prescribed area is excessively corroded Inner wing corroded and holed along below ABS pump mounting . (1.1.21 (e) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded Inner wing corroded and holed . (1.1.21 (e) (i))

Offside Rear Brake pipe excessively corroded Union into flexi hose is excessively corroded . (1.1.11 (c))

Central Exhaust mounting defective Exhaust bracket has corroded off . (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material Both sides into flexi hoses are corroded . (1.1.11 (c))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sides body mountings behind front wheel area are corroded . (6.2.2 (d) (i))

Front Lower Radiator support bar has completely corroded away .

Front Oil leak, but not excessive Differential . (8.4.1 (a) (i))

Front Suspension component corroded but not seriously weakened Both sides upper suspension tower rings are considerably corroded . (5.3.3 (b) (i))

Nearside Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Badly perished and starting to split . (2.1.3 (g) (i))

Nearside Front Windscreen wiper blade defective Split end . (3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material Union into flexi hose is badly corroded . (1.1.11 (c))

Nearside Rear Shock absorber corroded and cover insecure .

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis corroded and holed by shock absorber top mounting . Note : if welded bust be repaired with steel at least as thick as the original mounting and cannot be plated with body thickness plate . (5.3.6 (a) (i))

Oil leak, but not excessive Engine . (8.4.1 (a) (i))

Oil leak, but not excessive Gearbox area , borderline . (8.4.1 (a) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sides outer sills are corroded . (6.2.2 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides chassis at rear is considerably corroded . (5.3.6 (a) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting Chassis considerably corroded at rear both sides . (6.1.6 (i) (i))

Central Exhaust mounting defective Bracket behind centre box has corroded off . (6.1.2 (a))

Front Upper Suspension component corroded but not seriously weakened Both sides upper suspension tower rings are considerably corroded . (5.3.3 (b) (i))

Nearside Front Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Body mounting behind front wheel is corroded . (6.2.2 (d) (i))

Nearside Rear Suspension spring mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Corroded on sill in front of rear wheel by body mounting . (6.2.2 (d) (i))

Oil leak, but not excessive Engine . (8.4.1 (a) (i))

Oil leak, but not excessive Gearbox . (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis at rear generally corroded by suspension mounting points . (5.3.6 (a) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting Both sides . (6.1.6 (i) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corroded and holed by coil spring . (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Central Exhaust mounting defective Bracket behind centre box has corroded off . (6.1.2 (a))

Front Upper Suspension component corroded but not seriously weakened Both sides upper suspension tower rings are considerably corroded . (5.3.3 (b) (i))

Nearside Front Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Body mounting behind front wheel is corroded . (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Corroded on sill in front of rear wheel by body mounting . (6.2.2 (d) (i))

Oil leak, but not excessive Engine . (8.4.1 (a) (i))

Oil leak, but not excessive Gearbox . (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis at rear generally corroded by suspension mounting points . (5.3.6 (a) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting Both sides . (6.1.6 (i) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced bolt on cross-member below radiator is corroded and has large holes , security of cross-member will soon be an issue (6.1.1 (c) (i))

Front Upper Suspension component corroded but not seriously weakened both sides shock absorber tower rings corroded (5.3.3 (b) (i))

Oil leak, but not excessive Engine oil leak borderline (8.4.1 (a) (i))

Oil leak, but not excessive Gearbox area (8.4.1 (a) (i))

Rear Towbar slightly corroded within 30cm of towbar mounting both sides (6.1.6 (i) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded and holed by shock absorber top mounting ... note must be repaired with chassis thickness steel and not body repair steel sheet (5.3.6 (a) (i))

Electrical wiring likely to touch hot or rotating parts wiring fouling against steering column (4.11 (a) (iii)) DANGEROUS

Front Integral body structure is corroded but structural rigidity is not significantly reduced bolt on cross-member below radiator is corroded and has large holes , security of cross-member will soon be an issue (6.1.1 (c) (i))

Front Upper Suspension component corroded but not seriously weakened both sides shock absorber tower rings corroded (5.3.3 (b) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive badly corroded by shock absorber top mounting , borderline . (5.3.6 (a) (i))

Oil leak, but not excessive Engine oil leak borderline (8.4.1 (a) (i))

Oil leak, but not excessive Gearbox area (8.4.1 (a) (i))

Rear Towbar slightly corroded within 30cm of towbar mounting both sides (6.1.6 (i) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension component corroded but not seriously weakened both sides shock absorber tower rings corroded (5.3.3 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced bolt on crossmember corroding away badly and has large holes (6.1.1 (c) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Nearside Front Headlamp lens seriously defective yellowed and condensated on inner (4.1.1 (b) (ii))

Offside Front Headlamp lens seriously defective headlamp lens yellowed and deteriorated to excess (4.1.1 (b) (ii))

Steering column universal joint insecure u.j. on bulkhead insecure (2.1.3 (a) (i))

Front Suspension component corroded but not seriously weakened both sides shock absorber tower rings corroded (5.3.3 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced bolt on crossmember corroding away badly and has large holes (6.1.1 (c) (i))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Front door safety check strap missing

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Rear Anti-roll bar linkage ball joint dust cover severely deteriorated both sides badly perished and starting to split (5.3.4 (b) (i))

fuel filter casing corroded

Front Suspension component corroded but not seriously weakened shock absorber towers corroded both sides around fixing area (5.3.3 (b) (i))

Front bolt on crossmember corroded completely away

Nearside Front Headlamp lens slightly defective lens yellowed and deteriorated and also condensated on inner and starting to affect pattern (4.1.1 (b) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective lens yellowed and deteriorated and starting to affect pattern and output (4.1.1 (b) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front door safety check strap missing

Offside Front wiper arm is not secured to wiper spindle so wiper may not travel and clear windscreen

Offside Rear Towbar slightly corroded within 30cm of towbar mounting chassis leg corroded and swollen (6.1.6 (i) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt bottom ball joint on hub (5.3.4 (b) (ii))

Nearside Rear Service brake excessively fluctuating (1.2.1 (e))

Rear Brakes imbalanced across an axle 33% recorded , maximum allowance is 30% . Imbalance is being caused by large fluctuation (1.2.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides worn and lipped (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Front Suspension component corroded but not seriously weakened shock absorber towers corroded both sides around fixing area (5.3.3 (b) (i))

Front bolt on crossmember corroded completely away

Nearside Front Headlamp lens slightly defective lens yellowed and deteriorated and also condensated on inner and starting to affect pattern (4.1.1 (b) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective lens yellowed and deteriorated and starting to affect pattern and output (4.1.1 (b) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front door safety check strap missing

Offside Front wiper arm is not secured to wiper spindle so wiper may not travel and clear windscreen

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Towbar slightly corroded within 30cm of towbar mounting chassis leg corroded and swollen (6.1.6 (i) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Front Body has slight corrosion non structural bolt on cross-member corroded away (6.1.B.2)

Front both shock absorber turrets corroded

Front wiper linkage worn and has considerable movement

Nearside Front Headlamp deteriorated but light output not reduced headlamp condensated (1.7.5a)

Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front door safety check strap broken

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting chassis corroded (6.6.6)

Oil leak

Rear rear brake fluctuating, but not excessively both sides (3.7.B.3)

front of air-conditioning pulley has fallen off

Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Body has slight corrosion non structural bolt on cross-member corroded away (6.1.B.2)

Front both shock absorber turrets corroded

Front wiper linkage worn and has considerable movement

Nearside Front Headlamp deteriorated but light output not reduced headlamp condensated (1.7.5a)

Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front door safety check strap broken

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting chassis corroded (6.6.6)

Oil leak

Rear rear brake fluctuating, but not excessively both sides (3.7.B.3)

front of air-conditioning pulley has fallen off

Front Body has slight corrosion non structural bolt on cross-member corroded away (6.1.B.2)

Front wiper blades split and deteriorated

Nearside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear bump stops missing

Front Lower Shock absorber has a slightly worn bush (2.7.4)

Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

Offside rear fuel filler neck damp with diesel

Passenger seat(s) missing at time of test

Rear bump stops missing

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Trailer electrical socket insecure (1.9.3a)

Front Lower Shock absorber has a slightly worn bush (2.7.4)

Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside front wiper blade deteriorated

Offside Front Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

Offside rear fuel filler neck damp with diesel

Passenger seat(s) missing at time of test

Rear bump stops missing

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

rear axle rubber bump stops missing.

Nearside Front Drag link end ball joint has excessive play (2.2.B.1f)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

rear axle rubber bump stops missing.

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Horn reconnected

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)