1993 Rover Mini

Emissions not tested due to exhaust leak (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Main beam tell-tale not working (4.9.1 (a) (ii))

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps both lights not working (4.7.1 (b) (ii))

Nearside Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Nearside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Offside Front Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Offside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

slight corrosion to underside of vehicle

Brakes imbalanced across an axle (3.7.B.5b)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Emissions not tested (7.0)

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front position lamp(s) incorrect colour (1.1.A.3e)

Indicator switch faulty (1.4.A.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

rear seat back cushion loose

vehicle has slight corrosion to underside

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Headlamp aim too high (1.8)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Steering wheel retaining device insecure (2.1.6)

Suspension arm has excessive play in a ball joint (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Steering column top bearing slightly worn (2.1.2c)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Headlamp aim too high (1.8)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Outer Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)