1992 Rover 220

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear wheels close to the rear wheel arches

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front constant velocity joint gaiter missing (2.5.C.1a)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

nearside outer sill corroding

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Horn not working (1.6.2a)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

front brake application uneven (3.7.B.2)

front brake application uneven (3.7.B.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

o/s/f rack joint slight play